How to Draw Fire Place and Chimney on Floor Plan

The information in this article applies to:

QUESTION

I would similar to create a custom fireplace with an insert, hearth, and mantel. How can I do this?

ANSWER

Creative combinations of different objects such as fixtures, soffits, walls and wall openings allow you to create a wide variety of fireplace and chimney designs.

To build a chase for a fireplace insert

1. Select Build> Wall> Straight Interior Wall from the menu and draw iii walls to grade the chase for your fireplace and chimney. Don't worry well-nigh the exact placement of the walls correct now - they can be moved into position accurately in a moment.
2. Select CAD> Dimensions> Interior Dimension from the menu and drag an Interior Dimension line across the room - beginning at one wall and dragging straight through the side walls of the chase.
3. Select the left side wall of the chase. Use the Interior Dimension on the left to set the correct distance from the left side of the room.
   
4. Repeat this process with the wall on the right side of the chase and the wall forming the front of the hunt.
   

To place an insert into the chase

1. Select Build> Window> Window from the menu and click on the front wall of your chase to place a  window at that location.

   This window will exist used to create a wall  opening an insert can be modeled in.

   If the program warns you that you  are placing a window in an interior wall, click OK.

2. Click on the window to select it, click the Center Object edit button, and click inside the chase 'room' surface area. This will center the opening exactly betwixt the ii side walls.
   
3. With the window withal selected, click the Open Object edit button and in the Window Specification dialog that displays:
   • On the Full general panel, click the Window Type drop-downwardly arrow and select Stock-still Glass from the list. If you already know the size and height you want the opening to be, you can also specify information technology here.
   • On the Casing panel, uncheck Use Interior Casing and Use Exterior Casing.
   • In Habitation Designer Pro, select the Sill panel, and uncheck Use Interior Sill and Utilise Exterior Sill.
   • On the Lites panel, specify 1 for both Lites Across and Lites Vertical.
   • On the Materials panel, click on the word Glass, click the Select Material button, then browse and select a Burn down material from the Library.

     You can choose the other materials now if yous like or await until later. They can, of class, be changed at whatever time.

   • Click OK to shut the dialog and apply your changes.
     
4. Select View> Library Browser from the menu to open the Library Browser window.
   • Browse to Interiors> Accessories> Fireplace Accessories.

     

   • Depending on your program, at that place may be several fireplace screens bachelor. Click on i to select information technology, and so click in one case in your floor plan to place the selected screen in your programme.
     
5. With the fireplace screen still selected, click the Motility edit handle and drag the screen and so that it is direct in front of the window forming the insert opening.

   

6. Select 3D> Create Camera View> Acme from the menu and click and drag a camera view in the direction of the window and screen, keeping the photographic camera arrow perpendicular to the front wall.
7. If you don't run into the fireplace screen, navigate to Tools> Brandish Options from the bill of fare and identify a checkmark in the Disp column for the "Piece of furniture, Interior" display layer. In this summit view:
   • Click on the frame of the window to select it and resize the opening as desired using the edit handles that display.
   • Click on the fireplace screen to select it, and move and resize it  using the edit handles so that information technology fits within the frame of the window.
   • When yous are satisfied with the appearance of the frame and screen, select File> Close View to close the camera view and return to floor program view.

     

     The Elevation tool is non available in Home Designer Interiors. The Full Camera tool, which is available in all programs, can exist used instead.

8. In floor program view, select Window> Zoom from the carte du jour, then click and drag a rectangular marquee around the fireplace insert hunt, including the screen in the selection.
9. Click on the fireplace screen to select it, hold downward the Ctrl/Command key on your keyboard, and elevate the screen into the center of the window using the Motility edit handle. If the screen snaps to the outside border of the window opening, click the Open Object edit button and increase the Depth, or thickness, of the screen to 6 inches, then click OK and endeavor again.

   
   

If you have trouble selecting the fireplace screen, selecting nearby objects such as the wall or window instead, click the Select Next Object edit push button or press the Tab key on your keyboard until the screen is selected.

Many custom objects can be designed using the Soffit tool.

To add a hearth

1. Select Build> Cabinet> Soffit from the carte du jour, then click once in the program to create a soffit.
2. Select the soffit to brandish its edit handles and use those handles to motility the soffit into position in front of the fireplace and then resize information technology as needed.

   

3. With the soffit nonetheless selected, click the Open Object edit button and in the Soffit Specification dialog that displays:
   • On the Full general panel, specify the desired Height of the hearth, which should be almost the bottom of the insert opening.
   • Specify the Floor to Bottom distance as 0", since this hearth should residual on the floor.
   • On the Materials panel, click on the word Soffit,then click the Select Material push and browse the Materials library to notice an appropriate material for the hearth. Call up that this cloth tin be changed at any time.
   • Click OK to close the dialog and use your changes.
     
4.  You tin can create a cap for your hearth using a second, thinner soffit placed on elevation of the first if you so desire.

   

As cabinets characteristic front items such as drawers, doors and panels, the Full Height Chiffonier tool, which is some other kid of the Cabinet Tools, can exist used to create customized mantels and square columns beneath.

To add a mantel with columns

1. Select Build> Cabinet> Full Height from the menu, and then click to create a full height chiffonier in front of the fireplace.
2. Click on the full height cabinet to select it then click the Open Object edit button. In the Full Tiptop Cabinet Specification dialog that displays:
   • On the Full general panel, specify theDepth of your mantel.

     The Height, Width and Floor to Bottom altitude can be set using the edit handles in an Elevation view.

   • On the Front end panel, click on the bottom door of the cabinet in the preview image and click on the Delete button to remove this face item. And then click on the remaining door and specify it equally a Console in the Detail Blazon drib-down list.
   • On the Door/Drawer panel, select None from the Door Handle and Drawer Handle driblet-down lists.
   • Click OK to close the dialog and apply your changes.
     
3. With the full height chiffonier all the same selected, use the Move edit handle to motility it into position over the hearth.

   If y'all encounter any move restrictions while moving the mantel into place, press the Ctrl/Command primal on your keyboard to override these restrictions.

4. A 2nd foursquare, paneled column can be created using the aforementioned steps as above. A mantel can exist created to bridge the two columns.
5. Select 3D> Create Camera View> Pinnacle from the menu and click and drag a camera view in the direction of the fireplace. Use the edit handles to suit the size and position of  the mantel and columns as needed.

   

To create a chimney

1. Select Build> Chiffonier> Soffit  from the card, then click once in the plan to create a soffit.
2. Select the soffit to brandish its edit handles and use those handles to move the soffit into position within the chimney chase and then resize it so that it fills the interior space of the chase 'room'.
3. To extend the soffit through the exterior wall so that information technology displays on the exterior of your programme, press the Ctrl/Command central on your keyboard, and then utilise the Move edit handle to move the soffit through the exterior wall at the back of the hunt 'room'.
   

   Yous may need to adapt the size again afterward.

4. With the soffit withal selected, click the Open Object edit push, and on the General panel of the the Soffit Specification dialog:
   • Specify a Height that volition place the chimney top at an appropriate elevation to a higher place the roof.
   • Specify the Floor to Lesser distance at -18 and then that the soffit reaches through the floor platform to the basis level outside.
   • Click OK to close the dialog and apply your changes.
     
5. You can also add a cap to the chimney if you like by selecting View> Library Browser from the menu, browsing to Mechanical, Electrical, Plumbing> Ventilation and selecting a cap from the Chimney Tops folder.
6. Select 3D> Create Camera View> Perspective Total Overview from the menu to create a bird'south-eye view of the exterior of your plan, including the chimney.

   

   The Full Overview tool is not available in Home Designer Interiors, instead create an exterior Full Camera view.

   Notice that the chimney displays a beige sheetrock fabric. You lot tin select a more appropriate fabric for the   chimney   right hither in this view.

Materials for unlike objects tin can exist selected at whatever time. A groovy mode to cull materials is in a 3D Full Camera view using the Material Painter and Fabric Eyedropper tools.

To utilize materials to the fireplace and chimney

1. In the camera view displaying the chimney created above, select 3D> Material Painter> Cloth Painter to open up the Select Fabric dialog.
2. Browse into Home Designer Cadre Catalogs> Materials to find an bonny fabric for your chimney. The Masonry & Stone category and theCultured Rock® Manufacturer catalog are 2 good places to browse for brick, block and rock materials.

   

3. Click on a material to select it, then click the OK push to close the dialog. Your cursor will now display the Material Painter icon.
4. Click on the chimney to employ your selected material to this object.

   

5. Now, employ new materials to the fireplace, mantel, and hearth inside the model. Select File> CloseView to close the camera view and render to floor plan view.
6. Select 3D> Create Photographic camera View> Full Camera from the carte du jour and click and drag a camera view of the fireplace within the model. Every bit before, use the Textile Painter tool to apply new materials to the objects in your view.

   

   • Once yous select a textile in the Select Cloth dialog and click OK, you tin click on every bit many objects as you like to apply the selected material to each.
   • To utilize a different material, select 3D> Material Painter> Material Painter and choose a new cloth from the Select Material dialog.
   • If yous would like to apply a textile on one object to a different object in the view, select 3D> Fabric Painter> Material Eyedropper, click on the starting time object to load the desired material and then click on the second object to use information technology.

If you desire to paint the walls it is recommended that you use the wall specification dialog.

To view your custom fireplace and chimney

Select 3D> Create Photographic camera View> Doll Firm View from the menu to see the entire floor, including the chimney, only without the ceiling or roof planes.

To create the appearance of a masonry chimney, yous can apply a stone, block or brick material to the chase that you created using Interior Walls in the walls' specification dialogs.

If you lot desire to use a 2d material to surround the fireplace opening, use the Soffit tool.

To apply materials to the chase walls and fireplace surround

1. Click on the wall that defines the front of the chimney chase 'room' to select it, and and so click the Open Object edit button.
2. On the Materials console of the the Wall Specification dialog, click on the words Interior Wall Surface, then click the Select Material push and browse the Materials library to find the fabric you prefer.
3. If you lot would like to, echo this process with the walls defining the sides of the chase 'room.'
4. To create a surround for the fireplace opening, begin by placing a Soffit in your plan.
5. With the soffit selected, use the edit handles to reduce its width to one inch or then, depending on the cloth you would like to employ for your surround, then use the Move edit handle to position the soffit directly against the front end wall of the chase.
6. Select 3D> Create Camera View> Elevation from the menu and drag a camera view in the direction of the window and screen, keeping the camera arrow perpendicular to the forepart wall.

   Domicile Designer Interiors does not accept the Pinnacle tool, instead use the Full Camera tool.

   
   In this view:

   • Click on the soffit to select information technology and click the Re-create/Paste edit button. Click once in an empty expanse of the front wall of the chase to create a re-create of the soffit. Then repeat these steps to create a second copy in some other empty expanse.
   • Click the Select Objects   tool and edit the size, shape and location of each soffit and then that they form a consummate surround for the fireplace opening.
   • Select 3D> Cloth Painter> Material Painter from the menu and apply the desired material to the soffits forming your fireplace environment.

powersseased41.blogspot.com

Source: https://www.homedesignersoftware.com/support/article/KB-00744/creating-a-custom-fireplace-and-chimney.html